软件介绍
AlarmBoxApp is an application to control 'AlarmBox' which is programmed via a 9600 Baud USB serial interface, 8 data bits, 1 stop bit, no parity. Readings for the alarm triggers
or analogue outputs are obtained from an instrument connected via a second serial TTL or RS485 interface, again set for 9600 Baud 8 data, 1 stop, no parity.
AlarmBox polls the connected instrument for results using a fixed string loaded via the USB interface and at a chosen polling interval. For example, readings obtained from say,
an Osiris, could consist of 8 channels (TSP, PM10, PM2.5, PM1, WS, WD, T, RH). Each channel also has an associated scale factor and offset to convert the polled data to the same
engineering units shown on the instrument display.
Requirements:
>Android® mobile device that supports ‘On the Go (OTG)’ cable.
>On The Go (OTG) cable to connect to the AlarmBox’s USB connector.
or analogue outputs are obtained from an instrument connected via a second serial TTL or RS485 interface, again set for 9600 Baud 8 data, 1 stop, no parity.
AlarmBox polls the connected instrument for results using a fixed string loaded via the USB interface and at a chosen polling interval. For example, readings obtained from say,
an Osiris, could consist of 8 channels (TSP, PM10, PM2.5, PM1, WS, WD, T, RH). Each channel also has an associated scale factor and offset to convert the polled data to the same
engineering units shown on the instrument display.
Requirements:
>Android® mobile device that supports ‘On the Go (OTG)’ cable.
>On The Go (OTG) cable to connect to the AlarmBox’s USB connector.
历史版本
- 09/27/2022: AlarmBoxApp 2.6
- 报告一个新版本
- 软件名称: AlarmBoxApp
- 软件分类: 健康健身
- APK名称: com.turnkey.alarmboxapp
- 最新版本: 2.6
- 支持ROM: 4.0及更高版本
- 软件大小 : 1.48 MB
- 更新日期: 2022-09-27
